Geography Chapter 2 is the one where India takes physical shape — the mountains, plains, plateau, desert, coasts and islands you will locate on maps for the next two years of examinations. These class 9 geography chapter 2 notes explain how these features formed and describe each division with the locations and facts map questions demand. Learn the map first and the theory becomes easy, because nearly every answer in this chapter is a place.
For the surrounding chapters, revise alongside our companion geography notes — India Size and Location Class 9 notes before this, and Drainage Class 9 notes after.
class 9 geo chapter 2 notes
India’s relief was built by geological movements over millions of years. The Peninsular Plateau is one of the oldest landmasses on Earth, part of the ancient supercontinent Gondwanaland (whose other pieces became Africa, Australia, South America and Antarctica). The Tethys Sea once lay between Gondwana and the Angara landmass to the north; as the Indo-Australian plate drifted north and collided with the Eurasian plate, the sediments of the Tethys were folded upward into the Himalayas and the western mountains, while a depression formed in front of them that rivers filled with alluvium — the Northern Plains. Plate movements continue today, which is why the Himalayan region is earthquake-prone.
On the basis of relief, India’s physical features divide into six: (1) the Himalayan Mountains, (2) the Northern Plains, (3) the Peninsular Plateau, (4) the Indian Desert, (5) the Coastal Plains, and (6) the Islands.
physical features of india class 9 notes
The Himalayan Mountains
The Himalayas are young fold mountains — geologically young, rugged, and still rising. They stretch about 2,400 km from the Indus in the west to the Brahmaputra in the east, vary in width from about 400 km in Kashmir to 150 km in Arunachal Pradesh, and show greater altitudinal variation in the eastern half. Three parallel ranges run along their length:
- Himadri (Greater Himalayas) — the northernmost, most continuous range, with average height about 6,000 m and the loftiest peaks: Mount Everest (8,848 m, Nepal), Kanchenjunga (8,598 m, India), Makalu, Dhaulagiri, Nanga Parbat, Annapurna, Nanda Devi and Namcha Barwa. Its core is granite; it remains snowbound throughout the year and gives rise to major glaciers and rivers.
- Himachal (Lesser or Middle Himalayas) — between the Himadri and the Shiwaliks, altitude roughly 3,700–4,500 m, average width about 50 km. It is made of highly compressed and altered rocks and holds the famous valleys and hill stations: the Kashmir, Kangra and Kullu valleys; Shimla, Mussoorie, Nainital, Darjeeling (which lies in the eastern part). The Pir Panjal is its longest and most important range; other ranges include Dhaula Dhar and Mahabharat.
- Shiwaliks — the outermost range, 10–50 km wide and 900–1,100 m high, composed of unconsolidated sediments brought by rivers from the main ranges — which is why rivers could cut through it, and why landslides and earthquakes are common here. The longitudinal valleys between the Shiwaliks and the Himachal are called Duns (Dehradun, Kotli Dun, Patli Dun) in the west and Duars in the east.
Regional divisions by river valleys: Punjab Himalayas (Indus–Satluj), Kumaun Himalayas (Satluj–Kali), Nepal Himalayas (Kali–Teesta) and Assam Himalayas (Teesta–Dihang). In the northeast, the mountains continue as the Purvachal hills — Patkai, Naga, Manipur and Mizo hills — made of strong sandstone and covered with dense forest. Important passes: Shipki La (Himachal), Nathu La and Jelep La (Sikkim), Bomdi La (Arunachal). Note the Brahmaputra marks the easternmost boundary of the Himalayas, beyond Dihang gorge they bend sharply southward.
The Northern Plains
Formed by the alluvial deposits of three river systems — the Indus, the Ganga and the Brahmaputra and their tributaries — the Northern Plains stretch about 2,400 km, are 240–320 km broad, and cover roughly 7 lakh sq km. They are India’s most densely populated and agriculturally productive physiographic division. From north to south, three zones:
- Bhabar: an 8–16 km wide belt parallel to the Shiwalik slopes where rivers deposit pebbles and disappear/streams sink — the porosity of the gravel swallows small streams.
- Terai: south of Bhabar, the streams re-emerge, making a wet, swampy, marshy region once thick with forest and wildlife; much has been cleared for agriculture.
- Alluvial plains: the older alluvium is Bhangar (terrace-like, higher ground, containing pebble-like concretions called kankar), and the newer, flood-renewed alluvium is Khaddar — intensely fertile and ideal for intensive agriculture.
Regional subdivisions: Punjab Plains (Indus system, made of doabs — land between two rivers), Ganga Plains (from the Ghaggar to the Teesta — upper, middle and lower), and Brahmaputra Plains in Assam, known for riverine islands (Majuli, the world’s largest river island) and floods. The Ganga-Brahmaputra delta (the Sundarbans) is the world’s largest delta.
The Peninsular Plateau
The Peninsular Plateau is a tableland of old crystalline, igneous and metamorphic rocks — one of the oldest and most stable land blocks of India, with general elevation 600–900 m. The Narmada river divides it into the Central Highlands (north of the Narmada — the Malwa Plateau and the Bundelkhand/Baghelkhand extensions, bounded by the Aravalli range in the northwest; the Chotanagpur Plateau at its eastern end is rich in minerals) and the Deccan Plateau (south of the Narmada, a triangular landmass extending into the northeast as the Meghalaya/Karbi-Anglong plateau, separated from the main block by a fault along the Garo-Rajmahal gap). The black soil area of the northwest Deccan is called the Deccan Trap, of volcanic origin.
Bordering ranges: the Western Ghats — continuous, higher (average 900–1,600 m), with the highest peaks Anai Mudi (2,695 m) and Doda Betta (2,637 m) — and the Eastern Ghats — discontinuous and lower (average about 600 m), with the highest peak Mahendragiri (1,501 m). The Western Ghats cause orographic rainfall on their windward side; the Eastern Ghats are cut across by east-flowing rivers like the Mahanadi, Godavari, Krishna and Kaveri. Famous hill ranges also include the Aravalli (one of the world’s oldest fold mountains, now residual), Vindhya and Satpura.
The Indian Desert
The Indian Desert (Thar) lies towards the western margins of the Aravalli hills: an undulating sandy plain covered with sand dunes, receiving rainfall below 150 mm per year, with an arid climate and low vegetation cover. Barchans (crescent-shaped dunes) are characteristic; longitudinal dunes increase towards the Indo-Pakistan boundary. The Luni is the only large river in this region; streams appear briefly in the rainy season and disappear into the sand — inland drainage. Mushroom rocks and shifting dunes are its typical features.
The Coastal Plains
The narrow plains along the Arabian Sea and the Bay of Bengal are divided by the plateau into the Western Coastal Plain (narrow, average width 50 km, in three sections: Konkan in the north — Mumbai–Goa; Kannad Plain in the centre; Malabar Coast in the south, famous for lagoons and backwaters, kayals, used for fishing, inland navigation and tourism, including the venue of the Nehru Trophy boat race in Kerala’s Punnamada Kayal) and the Eastern Coastal Plain (wider, average 120 km: the Northern Circar in the north and the Coromandel Coast in the south, with large deltas of the Mahanadi, Godavari, Krishna and Kaveri, and the Chilika Lake — the largest saltwater lake in India, south of the Mahanadi delta).
The Islands
India has two island groups. The Lakshadweep Islands in the Arabian Sea (near the Malabar coast) are small coral islands — earlier called Laccadive, Minicoy and Amindivi, renamed Lakshadweep in 1973; Kavaratti is the administrative headquarters, and Pitti island, uninhabited, has a bird sanctuary. The Andaman and Nicobar Islands in the Bay of Bengal are larger, elongated north–south, and divided into the Andaman (north) and Nicobar (south) by the Ten Degree Channel. They are elevated portions of submarine mountains; some are volcanic — Barren Island has India’s only active volcano. The islands enjoy equatorial climate and thick forest cover with rich biodiversity.
Exam Focus: Map Points and Matching Facts
The map component of this chapter follows the list CBSE publishes with its curriculum — check the current year’s list in the CBSE curriculum documents and practise locating: the Himalayan ranges (Karakoram lies just north of the Himadri in the trans-Himalayan zone), Mount Everest and Kanchenjunga, the standard meridian region, the Aravalli, Vindhya and Satpura ranges, Western and Eastern Ghats, the Deccan and Chotanagpur plateaus, the Thar desert, Chilika Lake, and both island groups.
Match-the-following questions draw on a small stock of superlatives from this chapter — learn them cold: longest Himalayan range of the Himachal group (Pir Panjal), highest peak of the Western Ghats in the south (Anai Mudi), highest peak of the Eastern Ghats (Mahendragiri), largest river island (Majuli), largest saltwater lake (Chilika), world’s largest delta (the Sundarbans, formed by the Ganga and Brahmaputra), and the only active volcano (Barren Island). One revision session devoted only to this list converts the chapter’s most-scattered facts into guaranteed objective marks.
Frequently Asked Questions
Why is the Terai region marshy while Bhabar is dry at the surface?
In the Bhabar belt, coarse pebbles let streams sink underground. Where finer sediments begin in the Terai, those streams re-emerge, making the ground wet and marshy.
What is the difference between Bhangar and Khaddar?
Bhangar is older alluvium on higher terraces, less fertile and full of kankar nodules. Khaddar is new alluvium deposited by annual floods on lower ground — renewed every year and very fertile.
Why are the Western Ghats wetter than the Eastern Ghats?
The Western Ghats stand continuous and high across the path of the moisture-laden southwest monsoon winds, forcing orographic rain on the western side; the Eastern Ghats are lower and broken by river valleys.
Which is India’s only active volcano and where is it?
Barren Island in the Andaman Sea, part of the Andaman and Nicobar island group.
Conclusion
Physical features are a map with explanations attached: six divisions, each with one formation story and three or four signature facts. Practise drawing an outline map with the ranges, plains zones and island groups weekly, connect every feature to the river that created or borders it — as you will do for the rivers themselves in our Climate Class 9 notes and the drainage chapter — and Geography Chapter 2 becomes the most dependable map-and-theory combination of the year.


