Matter in Our Surroundings Class 9 Notes: States & Effects

Matter in Our Surroundings is the first chapter of Class 9 Science — and the gentlest numerical-free entry into chemistry, provided you learn its ideas through everyday examples. These matter in our surroundings class 9 notes cover the characteristics of particles, the three states of matter and their interconversion, latent heat, the Kelvin scale, evaporation with all its factors, and the lesser-known states, plasma and Bose-Einstein condensate. Almost every point is proven with an activity you can picture, which is exactly how exam questions are framed.

This chapter launches the chemistry sequence that continues in our Class 9 Science Chapter 2 notes on pure and mixed substances.

class 9 science notes chapter 1

Everything that occupies space and has mass is matter. The chapter proves three characteristics of its particles through simple activities:

  1. Particles of matter have space between them. Dissolving 2–3 crystals of potassium permanganate in 100 mL of water and repeatedly diluting small portions keeps colouring enormous volumes of water — the particles spread into the spaces. Salt and sugar dissolve into water’s spaces the same way; the Chinese whispers of scent from an incense stick or perfume across a room is this idea in gases. Particles of matter are continuously moving. The potassium permanganate colour spreads by itself because particles move and intermix — diffusion. Heating speeds it up: the same crystal colours hot water faster, showing that the kinetic energy of particles increases with temperature. The smell of cooked food reaching you in seconds, and bromine vapours spreading in a jar, are further examples. Particles of matter attract each other. The force of attraction differs between substances: an iron nail resists being broken, a chalk stick breaks more easily, and a rubber band stretches but snaps back. This explains why solids hold their shape while gases escape.

From antiquity, India (via Kanada’s vaisheshika ideas about parmanu) and Greece (Democritus) debated whether matter was continuous or particulate — the modern evidence supports particles.

The Three States of Matter: A Comparative Picture

Solids have a definite shape and volume: particles are tightly packed in a regular arrangement with strong intermolecular forces and the least intermolecular space; they are rigid and nearly incompressible (a sponge is an exception — it has minute holes trapping air, which is why it compresses).

Liquids have a definite volume but no definite shape — they take the shape of their container. Their particles are less tightly packed, forces are weaker, and they flow. Water, oil, milk and petrol pour at different rates, so liquids also differ among themselves.

Gases have neither definite shape nor volume. Particles are far apart, forces are negligible, movement is fast and random, and gases are highly compressible — LPG and CNG rely on exactly this, while hospitals transport oxygen in compressed cylinders. A standard comparison states that about 100 mL of a gas contains vastly freer particles than the same volume of solid or liquid, and gases diffuse far faster than the other states — the smell of perfume crossing a room in seconds, while ink spreads slowly in water.

class 9 science ch 1 notes

Interconversion of states is the chapter’s second half and is governed by temperature and pressure. The six changes are: fusion (solid → liquid, melting), vaporisation (liquid → gas), condensation (gas → liquid), solidification (liquid → solid, freezing), sublimation (solid ⇄ gas directly, without the liquid stage — camphor, naphthalene, iodine, ammonium chloride), and deposition (gas → solid directly).

Two temperatures must be defined precisely: the melting point is the temperature at which a solid melts to a liquid at atmospheric pressure — for ice, 0 °C or 273.15 K; the boiling point is the temperature at which a liquid boils at atmospheric pressure — for water, 100 °C or 373 K.

Latent heat is the hidden energy of these changes: heat absorbed or released during a change of state without any change in temperature. The latent heat of fusion is the heat required to convert 1 kg of a solid into liquid at its melting point (for ice, 3.34 × 10⁵ J/kg). The latent heat of vaporisation converts 1 kg of liquid into vapour at its boiling point (for water, 22.5 × 10⁵ J/kg). Two consequences are examined regularly: ice at 0 °C feels more effective in cooling a drink than the same mass of water at 0 °C, because ice absorbs additional latent heat to melt; and steam causes more severe burns than boiling water, because steam carries the extra latent heat of vaporisation, which it releases on condensing on your skin.

The Kelvin scale is the SI scale of temperature, with its zero at −273.15 °C. Convert with one formula: temperature in kelvin = temperature in Celsius + 273. (NCERT uses 273 for Class 9 simplicity: 0 °C = 273 K, 25 °C = 298 K, 100 °C = 373 K.) Kelvin readings never carry the degree sign or negative values for ordinary substances. Keep this particle model in hand when you move on to the Atoms and Molecules Class 9 notes, where the same particles acquire mass, symbols and the mole.

Pressure also converts states: increasing pressure and reducing temperature can liquefy gases. Solid carbon dioxide is stored under high pressure and expands directly into gas on release — dry ice, which sublimes without wetting.

Evaporation: The Cooling Process

Evaporation is the phenomenon of change of a liquid into vapours at any temperature below its boiling point. It is a surface phenomenon — only the particles at the surface with enough kinetic energy escape — while boiling is a bulk phenomenon occurring at a fixed temperature throughout the liquid. Four factors affect evaporation:

  • Surface area: more exposed surface, faster evaporation (clothes dry faster when spread out, tea cools faster in a saucer than a cup).
  • Temperature: higher temperature gives more particles the needed energy.
  • Humidity: more moisture already in the air means slower evaporation — the reason clothes dry slowly in the rainy season.
  • Wind speed: moving air carries vapours away, speeding evaporation (clothes dry faster on a windy day).

Evaporation causes cooling because the escaping particles take the highest energy with them, leaving the liquid cooler. This single idea explains a dozen applications: acetone or spirit on your palm feels colder than water because it evaporates faster; desert coolers work better on hot, dry days; water kept in earthen pots (matkas) becomes cool as it seeps through pores and evaporates; sprinkling water on a hot roof or courtyard cools it; we wear cotton in summer because it absorbs sweat and exposes it for evaporation; and a dog hangs its tongue out in summer to evaporate moisture for cooling. Frost forms on the pipes of air conditioners for the reverse reason — moisture condensing and freezing as the surfaces are cold.

States Beyond the Three in Our Surroundings: Plasma and BEC

NCERT adds two more states for enrichment. Plasma is an ionised gas — superheated matter in which particles exist as free electrons and ions. It is present in the Sun and stars (whose temperatures ionise gases) and artificially in fluorescent tubes and neon sign bulbs, where electric current ionises the gas to produce glowing plasma.

The Bose-Einstein condensate (BEC) forms when a gas of extremely low density (about one-hundred-thousandth of ordinary air) is cooled to super-low temperatures near absolute zero; it was predicted by Satyendra Nath Bose and Albert Einstein in the 1920s and created in laboratories in 1995 by Eric Cornell, Wolfgang Ketterle and Carl Wieman, who received the Nobel Prize in Physics in 2001. These are one-line answers — name, condition, example — but they regularly appear in objective sections. Cross-check all values once in the NCERT Class 9 Science book, and carry the particle model forward into our complete Class 9 science notes.

Intermolecular Force and Space: The Ladder Behind Every Property

Nearly every comparison in this chapter reduces to one ladder. Intermolecular forces are strongest in solids, weaker in liquids and weakest in gases; intermolecular spaces are smallest in solids, larger in liquids and largest in gases. From that single ordering, properties follow: solids keep their shape because strong forces lock particles in position; liquids flow because particles can slide past each other; gases fill any container and compress easily because their particles are far apart with free space to squeeze out. Density follows the same ladder — generally solids are densest, gases least dense — which is why a kilogram of iron occupies a fist-sized volume while a kilogram of steam fills a room. If a comparison question confuses you mid-exam, redraw the ladder mentally and derive the answer instead of recalling it.

One more derivation: diffusion is fastest in gases, slower in liquids and slowest in solids, because particle speed and free space both decrease down the same ladder. This is why the smell of an opened perfume bottle crosses a room in seconds while ink takes minutes to colour a glass of water and a gold ornament takes years to show measurable surface diffusion into a touching metal.

Frequently Asked Questions

Why does ice at 0 °C cool better than water at 0 °C?
Because ice absorbs extra heat — the latent heat of fusion — from the surroundings in order to melt, on top of being at 0 °C. Water at 0 °C can only absorb heat by warming up.

What is the difference between evaporation and boiling?
Evaporation happens at all temperatures, only at the surface, and is slow and silent. Boiling happens at one fixed temperature (the boiling point), throughout the liquid, and involves bubbling. Both are liquid-to-vapour changes.

Which factors increase the rate of evaporation?
Larger surface area, higher temperature, lower humidity and higher wind speed — all four speed up evaporation.

What is dry ice, and why is it called dry?
Dry ice is solid carbon dioxide stored under high pressure. On release it converts directly from solid to gas (sublimation) without passing through a liquid stage, so it never wets anything — hence “dry”.

Conclusion

One model — particles with space, motion and attraction — explains all three states, every conversion between them, latent heat and evaporation’s cooling. Anchor each idea to its activity or everyday example, keep the Kelvin conversion and latent-heat numbers exact, and the first chapter of your science course becomes the easiest full-score chapter of the year.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top