Acids, Bases and Salts is the most activity-rich chapter in Class 10 Chemistry — nearly every concept comes with a test-tube observation the examiner can ask about. These class 10 science chapter 2 notes organise the whole chapter around what you can see, measure and write: indicator colour changes, the pH scale, and the family of everyday salts made from common salt. Master the colour-change tables and this chapter pays you back in every test.
If you have not revised it yet, finish our Class 10 Science Chapter 1 notes first, because the equations here assume you can balance and classify reactions confidently.
Acids and Bases: Properties and Tests
Acids taste sour, turn blue litmus red, and react with metals to release hydrogen gas (which burns with a pop sound). Strong laboratory acids include hydrochloric acid (HCl), sulphuric acid (H₂SO₄) and nitric acid (HNO₃); natural sources are also tested — citric acid in lemon and orange, acetic acid in vinegar, oxalic acid in tomato, tartaric acid in tamarind, lactic acid in curd, methanoic (formic) acid in ant and nettle stings, and ascorbic acid in amla.
Bases are bitter, soapy to touch, and turn red litmus blue. Common bases: sodium hydroxide (NaOH, caustic soda), calcium hydroxide (Ca(OH)₂, slaked lime), potassium hydroxide (KOH), ammonia (NH₄OH) and magnesium hydroxide (Mg(OH)₂, used in antacids). Bases that dissolve in water are called alkalis. Both acids and bases conduct electricity in aqueous solution because they produce ions: acids give H₃O⁺ (hydronium) ions and bases give OH⁻ (hydroxide) ions. Dry HCl gas does not change dry blue litmus — acids show acidic behaviour only in the presence of water.
Two safety facts are guaranteed question material. First, dilution: always add acid to water, slowly with stirring — never water to acid — because the process is highly exothermic and the acid can splash out. Second, strong acids and bases are corrosive and must be handled with care.
Indicators: The Colour-Change Table
An indicator is a dye that changes colour in acidic and basic solutions. The natural and synthetic indicators to know:
- Litmus (from lichens): red in acid, blue in base.
- Turmeric: stays yellow in acid, turns reddish-brown in base — the reason a soap stain on a turmeric-stained cloth turns red-brown.
- Methyl orange: red/pink in acid, yellow in base.
- Phenolphthalein: colourless in acid, pink in base.
Olfactory indicators change smell instead of colour: onion, vanilla essence and clove oil lose or change their smell in basic solutions. These exist for visually impaired students — a thoughtful one-mark question.
class 10 chemistry chapter 2 notes
This middle stretch of the chapter covers reactions and the pH scale — the part students find longest but which is purely logical once organised.
Reactions of acids and bases. Acids react with metal carbonates and metal hydrogencarbonates to give the corresponding salt, carbon dioxide and water; the CO₂ turns lime water milky — this is the standard test for carbon dioxide. Acids react with bases in a neutralisation reaction to form salt and water: NaOH + HCl → NaCl + H₂O. Metallic oxides are basic (they react with acids), and non-metallic oxides are acidic (they react with bases), which is the cleanest way to prove the nature of an oxide.
The pH scale runs from 0 to 14 and measures H⁺ ion concentration: below 7 acidic, exactly 7 neutral, above 7 basic. Universal indicator shows a spectrum of colours across the scale. pH in everyday life is a ready-made application list: our stomach produces HCl, and excess acid causes acidity cured by antacids containing Mg(OH)₂; tooth decay starts when the pH in the mouth falls below 5.5 and bacteria produce acid that corrodes enamel; soil pH is corrected with quicklime or slaked lime when too acidic and with organic manure when too alkaline; bee stings inject formic acid, relieved by baking soda, while a nettle sting is soothed similarly; and acid rain (pH below 5.6) harms aquatic life.
Salts and their pH. A salt is an ionic compound formed by neutralisation. Salts of strong acids and strong bases are neutral (NaCl, pH 7); salts of strong acids and weak bases are acidic (NH₄Cl); salts of weak acids and strong bases are basic (CH₃COONa, Na₂CO₃). Salts of the same acid family share the anion — the chloride family (HCl), sulphate family (H₂SO₄), nitrate family (HNO₃).
Chemicals from common salt — the industrial heart of the chapter. Common salt (NaCl) is the raw material for several chemicals. The chlor-alkali process electrolyses brine: 2NaCl + 2H₂O → 2NaOH + Cl₂ + H₂. Chlorine is used for bleaching powder and HCl; hydrogen for fuels and ammonia.
Bleaching powder, CaOCl₂, is made by passing chlorine over dry slaked lime and is used for bleaching cotton and disinfecting drinking water. Baking soda, NaHCO₃, is used in baking powder (with tartaric acid), antacids and soda-acid fire extinguishers; on heating it gives washing soda: 2NaHCO₃ → Na₂CO₃ + H₂O + CO₂. Washing soda, Na₂CO₃·10H₂O, is used in glass, soap and paper industries and to remove permanent hardness of water. Plaster of Paris, CaSO₄·½H₂O, is made by heating gypsum (CaSO₄·2H₂O) at 373 K; mixed with water it sets back into a hard gypsum mass — used for casts, toys and decoration. Store it in moisture-proof containers, because it absorbs water and sets uselessly.
Water of crystallisation is the fixed number of water molecules in one formula unit of a salt. Blue copper sulphate crystals (CuSO₄·5H₂O) turn white on heating as the water is lost, and turn blue again when water is added — a neat reversible test to end the chapter.
Activity Observations That Are Asked Again and Again
Chapter 2 questions are built from its activities, so revise the observations, not just the conclusions. When zinc granules react with dilute sulphuric acid, bubbles of hydrogen form and the flask becomes warm — an exothermic reaction. When hydrochloric acid is added to sodium carbonate, brisk effervescence of carbon dioxide appears, and the gas turns lime water milky, then colourless again if passed in excess because soluble calcium hydrogencarbonate forms. When a solution of sodium sulphate is mixed with barium chloride, a white precipitate of barium sulphate appears instantly. When copper sulphate solution gets a few drops of sodium hydroxide, a pale blue precipitate of copper hydroxide forms. Dry blue litmus stays unchanged in dry HCl gas but turns red in aqueous acid — the single observation that proves acids need water to show acidity.
Also learn the three test-tube acid reactions as one family: acid + metal → salt + hydrogen; acid + metal carbonate → salt + water + carbon dioxide; acid + base → salt + water. If you can write these with one example each and name the observation, every activity-based and case-based question in this chapter reduces to pattern matching.
Strong vs Weak, Concentrated vs Dilute: Four Words Students Confuse
A strong acid or base ionises completely in water (HCl, H₂SO₄, NaOH, KOH), while a weak one ionises partially (CH₃COOH, NH₄OH). Strength says nothing about concentration: concentrated describes how much substance is dissolved in a given volume of solution, dilute describes how little. You can have a concentrated solution of a weak acid and a dilute solution of a strong acid — and both statements appear as assertion-reason traps.
On the pH scale, each step of 1 means a ten-fold change in H⁺ concentration: a solution of pH 3 has ten times the H⁺ concentration of pH 4 and a hundred times that of pH 5. Universal indicator paper dipped in solutions of increasing pH shows the rainbow from red through green to violet — worth describing in answers on how pH is measured without a meter.
How to Prepare This Chapter for the Exam
Make one A4 colour table for indicators and practise it until colour pairs are automatic. Write every named compound with its formula and one use in a separate list — NaOH, CaOCl₂, NaHCO₃, Na₂CO₃·10H₂O, CaSO₄·½H₂O, CuSO₄·5H₂O — because direct formula questions come from this set every year. Then complete the reactions file from our broader Class 10 chemistry notes, keep the whole subject in view with our Class 10 science notes, and verify any doubtful line against the NCERT textbook.
One-Page Formula and Compound Sheet
Before your test, write this compressed sheet once from memory: acids — HCl, H₂SO₄, HNO₃; bases — NaOH, KOH, Ca(OH)₂, Mg(OH)₂, NH₄OH; salts — NaCl (common salt), Na₂CO₃·10H₂O (washing soda), NaHCO₃ (baking soda), CaOCl₂ (bleaching powder), CaSO₄·½H₂O (Plaster of Paris), CaSO₄·2H₂O (gypsum), CuSO₄·5H₂O (blue vitriol). Add one use beside each compound and one test beside each gas from this chapter: hydrogen (pop sound), carbon dioxide (turns lime water milky), chlorine (greenish-yellow, bleaching). This single page, revised weekly, carries the majority of this chapter’s objective marks.
Frequently Asked Questions
What is the pH of a neutral solution?
Exactly 7 at room temperature. Values below 7 are acidic and above 7 are basic; the further from 7, the stronger the acid or base.
Why should acid be added to water and not the reverse?
Mixing concentrated acid with water releases a lot of heat. If water is added to acid, the mixture can boil violently and splash acid out; adding acid to water slowly keeps the heat spread through a larger volume.
What is the difference between baking soda and baking powder?
Baking soda is pure sodium hydrogencarbonate (NaHCO₃). Baking powder is baking soda mixed with a mild edible acid like tartaric acid, so it works even without curd or lemon in the recipe.
Why does tooth decay start below pH 5.5?
Below 5.5 the acid produced by mouth bacteria is strong enough to corrode enamel, the hardest substance in the body — which is why dentists stress brushing after meals and why toothpastes are mildly basic.
Conclusion
Chapter 2 is a colour-table chapter: indicator changes, pH numbers and five important salts. Learn the tables, anchor every compound to its formula and one use, and you can handle both its activity questions and its application questions with confidence.


